|
General
Information
The DSX-1043 is an independent processing, 16 output, intelligent controller
designed to be a cost effective building block in the DSX hardware platform
that allows expansion in a scalable manner. Up to 64 outputs can be controlled
from 1 enclosure for an efficient space saving package. Each DSX-1043
operates as a fully intelligent and independent controller that retains
all data necessary for system operation in its own RAM. With its integral
real-time Clock and Calendar it performs Time Zone control with Holiday
overrides for outputs even when communication to the PC or other controllers
is not available. The DSX-1043 carries a Limited 2 Year Warranty.
Controller
Architecture
The DSX-1043 Intelligent Controller may be used in conjunction with all
other DSX Controllers as a Master or Slave in the controller network.
Any controller may be designated as a Master or Slave controller. The
Master or Slave mode of operation is determined by the panel's dip switch
settings. The first panel of each location is designated as the Master
while all others would be considered Slaves. The Master is responsible
for communications to the PC and to the Slave panels. Up to 64 Controllers
can be used in a single Location.
Up to four DSX-1043 controllers can be placed in a DSX-1040E Enclosure
along with a DSX-1040CDM Communication Distribution Module. The controller
can be placed in a 1042PKG mixed with DSX-1042 and DSX-1044 Controllers.
The DSX-1043 contains an AM186 processor, 512K of RAM, 512K of Flash ROM,
and a Real Time Clock. The DSX-1043 allows all door and field wiring connections
to be made via removable terminal blocks. The DSX-1040CDM receives RS-485
communications from a possible previous panel and regener-ates the 4 wire-RS485
to the next DSX Controller. The DSX-CDM also distributes Slave Controller
communication to those Slave panels located within the same enclosure.
Outputs
The DSX-1043 has 16 Programmable, Form-C, 5 Amp rated Relay Outputs. The
on/off state of the outputs can be controlled by up to 4 Time Zones, I/O
& Card Linking, and Manually from the PC. The Relay Override Input
requires a closure for the outputs to operate. When the Override Input
is open the outputs are de-energized. All Outputs have an LED for status.
Inputs
The DSX-1043 has 2 non-supervised inputs for tamper monitoring. The armed
status of each input can be controlled by up to 4 Time Zones, I/O &
Card Linking, and Manually from the PC.
SystemPower
Each DSX-1043 is powered from an individually fused 12 volt output from
the DSX-1040CDM distribution module located in the same DSX-1040E enclosure.
The DSX-1040CDM receives power from the DSX-1040PDP Power Distribution
Panel. The DSX-1040PDP houses the controller and lock power supplies,
backup batteries, and fused power distribution module. The DSX-1040PDP
is comprised of a DSX-1040PE Enclosure, an AS-150 15VDC power supply for
the Controllers, an AS-100-[15] or [24] for either 12V or 24V locks, and
a DSX-1040PDM Power Distribution Module.
|